Service Programme (Royal Classic); Test Mode - Saeco Classic Service Manual

ROYAL

1. Service programme (Royal Classic):

1.1. Test mode

Access the service mode by turning on the machine and simultaneously pressing the
Access:
Coffee and steam buttons.
Press Coffee and Steam buttons.
Various test functions can be activated in the service mode by activating either the coffee or steam
buttons in conjunction with various coffee quantity settings.
Programme table
Function
Pump/Turbine *
Brewing unit
(Gearmotor)
Heating
Brewing unit
(Gearmotor)
Dosing magnet
Grinder
HWS microswitch
* The HWS valve must be open.
The current boiler temperature can be read in service mode by pressing the coffee and steam buttons at
the same time.
Each combination of LEDs provides an indication on the current boiler temperature
(see table below).
Temperature table
Temperature
status
T ≤ 94ºC
T = 95ºC
T = 96ºC
T = 97ºC
T ≥ 98ºC
Saeco International Group
5. SERVICE PROGRAMME
Button Control
setting
Coffee
Steam
Coffee
Steam
Coffee
Steam
Coffee LED Steam LED
X
X
X
REV.4 SEPT.2003
LED Indicator
Fault LED
(flow meter pulses)
Coffee LED
Gear switch
(brewing setting)
Coffee LED
Gear switch
(home position)
Steam LED
Doser full
Steam LED
Fault LED
X
X
X
X
Page 1/24