Removing The Shift Mechanism - KTM 450 SX-F Repair Manual

4-11
3
4
6
5
1
2
– Remove the needle roller
– Remove the screws on the oil pump cover and take off the oil pump
cover.
– Remove the suction oil pump together with the oil pump shaft and
needle roller.

Removing the shift mechanism

– Push back the shift rail
with the stop disk.
– Remove the screw .
4
– Press back the locking lever
the locking lever again.
NOTE: the locking lever
5
engine is dismounted.
– Remove the lock ring .
6
.
1
and remove the shift shaft
2
and remove the shift lock; release
5
does not need to be removed when the
together
3