1
2
3
4
5
Preparation
– Thoroughly clean the outside of the engine and clamp in the
universal work stand 560.12.001.000 with the engine holders
773.29.002.000.
– Remove the shift lever.
Draining the engine oil
– Remove the oil drain plug
– Tap lightly with a hammer to relieve the plug
– Remove the plug together with the oil screen.
– Completely drain the engine oil.
Removing the oil filter
– Remove both screws
and take off the oil filter cover together with
3
the O-ring.
– Pull the oil filter insert
4
510.12.011.000.
Removing the starter
– Remove both screws
and take out the starter together with the O-
5
ring.
together with the seal ring.
1
.
2
out of the housing with the circlip pliers
4-2