Removing The Clutch Cover; Removing The Clutch - KTM 450 SX-F Repair Manual

4-5
1
3
3
5
4
2
3
3
6
4
7
8
9

Removing the clutch cover

– Remove the plug including the O-ring.
1
– Insert the mounting pin
2
NOTE: you do not need to remove the water pump cover to remove the
clutch cover.
– Remove the screws and completely take off the clutch cover.
3
– Pull the rollers out of the engine case.
4
– Remove the quad ring
5

Removing the clutch

– Loosen the screws on the pressure cap in a crosswise direction and
remove together with the washers and springs.
– Remove the pressure cap
– Take out the pressure piece
– Take the clutch disk package
773.29.012.100.
and O-ring .
6
.
7
and pull out the pushrod.
8
out of the outer clutch hub.
9