Catch Pan Waste Tank Connection; Figure 19 Catch Pan Waste Tank Connection - Kodak VERSAMARK DP7122 User Manual

Ink and Replenisher Procedures
Connecting Waste Tanks

Catch Pan Waste Tank Connection

The metal service catch pan shipped with the printer has its own waste
tank to collect fluid during printhead swabbing procedures. Connect the
waste tank to the catch pan as shown in Figure 19. For instructions on
using the service catch pan, see the printer Operator's Guide (0114130-
603). For printhead procedures, see the Printhead Replacement
Instructions (0114195-603).
Warning: General Danger
Never use any plastic or insulating material to collect ink from the 7122 printhead.
Never apply charge voltage with the catch pan installed or touch the printhead or
catch pan except as required to perform the procedures described in the
Operator's Guide
. Read all procedures through before performing any action.
Figure 19 Catch pan waste tank connection
20