Ink and Replenisher Procedures
Connecting Waste Tanks
Connecting Waste Tanks
18
The 7122 printer requires the following two external waste tank
connections:
•
System waste tank
•
Catch pan waste tank.
Each tank is part of a kit shipped with the printer (see Table 4). The same
TANK-2 GALLON ASME UM CODE CONSTRUCTION MAAX WORKING
PRESSURE=190psi@100 DEG F 1-11 1/2NPT FLOAT SWITCH PORT
(0101270-022) is used in both kits.
If the printer and its associated fluid containers are moved, the waste
tanks must be properly reconnected before resuming operation.
Table 4
Waste tank kits
Part Number
Description
0193854
SERVICE CATCH PAN KIT (see Figure 19)
0193835
WASTE TANK KIT
Exercise caution when moving the printer. Before moving the printer,
disconnect and move all fluid containers. After positioning the printer, lock
its casters, then reconnect and properly ground all fluid containers before
powering up the printer.
Warning: Electrostatic Sensitive Devices
Avoid generating static electricity. Static can ignite ink, replenisher, or vapor.
Strictly follow all grounding instructions.
Warning: General Danger
Read all safety information and operator procedures through before performing
any action.
Warning: Irritant
Avoid contact with all fluids, ink and replenisher.