Connections And Setup; Connecting The Projector To Other Devices - Runco Reflection CL-410 Owner's Operating Manual

Before Setting Up
Note:
• Before connecting, be sure to turn off both the projector and the sources to be
connected. After making all connections, turn on the sources first, followed by
the projector.
When connecting a computer, be sure that the computer is the last device to be
turned on after all the connections are made.
• Be sure to read the user manuals of the devices to be connected before making
connections.
• After connecting the projector to other devices, you need to set the proper input
for the projector. See "Selecting Input Source" on page 26.
This projector can be connected to:
Video Equipment:
■ VCR, Laser disc player or other video equipment with a Composite video
output.
■ DVD player or DTV decoder or other device with an S-video output.
A Computer:
Connect to the computer with one of the following types of cable, depending
on the specifications of your computer:
■ HD 15-pin VGA to HD 15-pin VGA cable
■ DVI-D to DVI-D cable
■ RS-232C cable
Connecting the Power Cord
Plug the supplied power cord into the AC socket
on the rear of the projector. Connect the other end
of the cord to a power outlet.

Connections and Setup

13
Connecting the Projector
to Other Devices