Easy-To-Use Functions; Aspect Ratio - Runco Reflection CL-410 Owner's Operating Manual

Easy-to-Use Functions

This function enables you to modify or customize the aspect ratio. The aspect ratio

Aspect Ratio

refers to the picture display mode and the proportions of the screen image. Depending
on the input signal, you can choose (16x9) Anamorphic, (4x3) Standard, LetterBox,
VirtualWide, Cinema, or Virtual Cinema aspect ratios. Aspect ratio can be adjusted
with the remote control or from the on-screen settings menu.
Changing Aspect Ratio with the Remote Control
Use the aspect keys on the remote control to change aspect ratio. There are six aspect
keys on the remote control, one for each aspect ratio.
Button Aspect Ratio
ANA Anamorphic
4 × 3 Standard
LET BOX Letterbox aspect
V-WIDE Virtual Wide
CINEMA
Cinema
V-CINE Virtual Cinema
Changing Aspect Ratio with the Settings Menus
1 Select Aspect Ratio from the main settings menu.
2 Use ▼ ▲ to select the desired aspect ratio, then press ENTER.
Main Menu
The following tables give details for various aspect ratios, including ratios, resolutions
in pixels, supported video standards, and graphics to show the screen appearance.
There are two different sets of tables: One set for images input from video equipment,
and one set for input from a computer.
For example, an image projected using standard aspect resolution appears as a
rectangle with the following qualities:
• The width and height of this rectangle in pixels are 1024 x 576.
• The proportion of width to height, expressed as a ratio, is 4:3.
33