Office Work; Download Procedures; Working On Field Data Collected With "Surveying; Downloading Raw Data - Magellan ProMark3 RTK Getting Started Manual

Do not forget to double-tap
the Surveying icon or else
no communication will be
possible between ProMark3
and the PC.
62

8. Office Work

Download Procedures

The easiest way to download ProMark3 data to your PC is to
remove the SD card from the ProMark3 and insert it into your
PC card reader. This implies the following:
1. All your field data should have been saved on the SD card
(see setting on page 8).
2. Your PC should be equipped with an SD card reader.
If you do not have a card reader on your PC, then you should
connect the ProMark3 to your PC via the USB cable provided.
Field data collected with the FAST Survey option can only be
downloaded via the USB cable.
This chapter more particularly describes the download proce-
dures based on the use of the USB cable provided. It is as-
sumed that both GNSS Solutions and Mobile Mapper Office
have already been installed on your PC.
Working on Field Data
Collected With "Surveying"

Downloading Raw Data

1. On ProMark3:
- Turn on the receiver.
- Double-tap the Surveying icon.
- Make sure the ProMark3 Storage option setting will
allow the Download utility to access the desired files.
For example, if the files to be downloaded are on the
SD Card, make sure SD Card is selected as the Storage
option. To set this information, press the MENU key
then select Setup then Storage.
2. Clip the I/O module as shown opposite.