Nav Does Not Work; Dashes Appear In Nav Displays; Zeroes Appear In Pos, Nav, And Vel Displays; Satellite Availability Not To Your Expectations - Magellan NAV 5000 User Manual

NAV DOES NOT
WORK
Do thls:
Try this:
Do this:
DASHES APPEAR IN
NAV DISPLAYS
ZEROES APPEAR IN POS,
NAV, AND VEL DISPLAYS
Do this:
SATELLITE AVAILABILITY
NOT TO YOUR
EXPECTATIONS
You must set a route to use NAV.
Enter a route, or select a route leg to
navigate on.
You must be travelling faster than 0.2
knots to get velocity-related data,
such as Speed Over Ground (SOG),
ground course (COG), Steering,
Speed Of Advance (SOA), Estimated
Time of Arrival (ETA), Time To Go
(TTG), or Velocity Made Good
(VMG).
lncrease speed to 0.2 knots or
greater.
Navigation-
data is not available until three fi-
xes have been made.
Wait until three position fixes have
been taken, then try again.
You are 65.6 feet (20 meters) or less
from your destination. Distance to
destination is no longer available, and
Bearing varies considerably. This is
normal.
Your speed is too slow to provide
velocity-related data such as speed,
ground course, and steering. You
must be travelling at least 0.2 knots
to obtain this data.
Increase your speed to at least 0.2
knots.
The position or health of a satellite
may have been changed by the
government. You may also have last
collected an Almanac on a day when
6-9
and velocity-related