Downloading Rtk Data Collected With Fast Survey - Magellan ProMark3 RTK Getting Started Manual

66
Downloading RTK Data
Collected With FAST Survey
1. On the ProMark3 RTK:
- Clip the I/O module as shown opposite.
- Turn on the ProMark3 RTK.
- Connect the USB cable between the ProMark3 unit
and your PC.
The first time you connect ProMark3 to the office
PC, you may be asked to install a USB driver on the PC
(although this driver should normally have been
installed when installing GNSS Solutions). This driver
is located on the GNSS Solutions CD in the ".../USB
Driver/PROMARK/" folder. Once you have inserted the
CD in your CD drive, ask the PC to search for this
driver on the installation CD and then follow the on-
screen instructions to complete the driver installation.
- Double-tap the FAST Survey icon.
- Select File>6. Data Transfer. This opens the Data Trans-
fer window.
- At the bottom of this window, select "USB (COMx)"
from the COM Port combo box.
- Tap the SurvCom Transfer button. This opens the File
Transfer window.
2. On the PC:
- Launch GNSS Solutions and then click Create a new
Project.
- Name the project and click OK.
- Select the same coordinate system (spatial reference
system) as one the used in FAST Survey for the job you
want to download. Select the appropriate time zone
and then click OK.
- Click Do Not Import Anything Now. A new empty project
opens in GNSS Solutions.