Castor Wheels - Invacare XLT Power U-front Service Manual

B
A
C
Tools: 4 mm Allen key
5 mm Allen key
10 mm fixed spanner
20

CASTOR WHEELS

90 º
The manoeuverability of the wheelchair is very much
dependent on the castors and their position relative
to the ground surface. The angle between the castors
and the ground should be 90 degrees.
Adjusting the castor angle
To adjust the castor angle, loosen nuts (A) with 1-2
turns with a fixed spanner, while holding screws (B)
firmly in place with a 4 mm Allen key.
Adjust the castor housing to desired angle by inserting
the 5 mm Allen key in the hexagon
ning it to the desired angle. Retighten nuts (A).
Check that the castor is securely fitted after
replacement.
INVACARE
hole (C) and tur-
XLT Service Manual
®