Castor Wheels, Adjustment - Invacare rea Spirea 2 User Manual

1.
2.
6QQNU  OO #NNGP MG[
3.
Spirea 2

CASTOR WHEELS, ADJUSTMENT

A
A
0
1. When you have found the seat height and seat
angle you are pleased with, it is important for
the chair's propelling ability to control that the
angle between the castor attachment and the
ground is 90°.
2. Adjusting the angle
Loosen screws (A) approximately two turns.
Adjust the castor housing to the correct angle
by turning it. On the inside of the castor housing
there are ribbed marks that provide the possibility
to adjust to 0°, 3° or 6° angle. When the castor
house is parallell to the tube, the angle is 0°. Do not
forget to tighten the screws when you've reached
the desired angle.
Control that the castor housing is fastened
properly after the adjustment.
3. Adjusting the height
Loosen the lower of the two screws (A) com-
pletely.
Loosen the upper screw approximately two turns.
Move the castor housing upwards.
Re-attach the lower screw, but do not tighten
completely.
Adjust the angle according to point 2 above.
Tighten both screws.
Control that the castor housing is fastened
properly after the adjustment.
21