Creating New Groups - Wyse 9450XE Reference Manual

56
To add a user to the Administrators group:
1. Log-in as an administrator.
2. Click Start | Settings | Control Panel | Administrative Tools, and then double-click
3. In the Local Users and Groups window, select (highlight) the Users folder in the left
4. In the right pane of the Local Users and Groups window, double-click the name of the
5. Click the Member Of tab.
6. Click Add to open the Select Groups dialog box.
7. Type Administrators in the Enter the object names to select field to enable the
8. Click Check Names, and then click OK.
9. Flush the cache to retain this change.

Creating New Groups

New groups can be created by using the User Manager. You must be logged-on as an
administrator to create new groups. You can create groups locally or remotely through
VNC. However, due to local flash/disk space constraints, the number of additional groups
should be kept to a minimum.
To create a new group:
1. Log-in as an administrator.
2. Click Start | Settings | Control Panel | Administrative Tools, and then double-click
3. Click the Groups folder to view the contents in the right pane.
4. Click Action in the menu bar, and then click New Group to open the New Group dialog
5. Type in the group name and description.
6. Click Create.
7. Click Close.
recommended that extreme care be exercised when changing configuration
settings of the factory-installed applications.
the User Manager icon to open the Local Users and Groups window.
pane.
user to open the [user name] Properties dialog box.
Check Names command button.
The user will now be a member of both the Administrators and Users groups.
Caution
Be sure to flush the Enhanced Write Filter cache during the current system
session in which a new group is created.
the User Manager icon to open the Local Users and Groups window.
box.