Winlog - Wyse 9450XE Reference Manual

40
The default language for the user interface is English (US). If your thin client contains a
multi-language build and you want to change to another language, complete the following
procedures:
1. Click Start | Settings | Control Panel.
2. Double-click the Regional and Language Option icon to open the Regional and
3. Click the Languages tab.
4. Select a language from the Language used in menus and dialogs list box, and click
5. Click OK.
6. In the Regional and Language Options dialog box, click OK and then close the Control
7. Log off the current user.

Winlog

The default for the thin client is automatic log-on. Double-clicking the Winlog icon in the
administrator Control Panel opens the Winlog dialog box. Use this dialog box to enable or
disable auto logon, and change the auto logon user name, password, and domain. Only
the administrator logon account can change auto-logon properties.
Language Options dialog box.
Apply.
A message informs you that changes will not take effect until you logoff and logon
again.
Panel.
The next time the user logs on, the GUI will be in the selected language.
Note
For more information on multi-language builds, go to: http://www.wyse.com.
The keyboard layout does not automatically change with the GUI changes. It
must be changed manually.
Third-party applications, Wyse applications, and Microsoft names remain in
English after the interface is changed.
Note
To save the changes, be sure to flush the Enhanced Write Filter cache at any
time during the current system session. For information about the Enhanced
Write Filter and procedures for flushing the cache, refer to "Enhanced Write
Filter" on page 43.