Wyse X90LE Installation Manual
Mobile thin clients flash and memory upgrade kit
Hide thumbs
Also See for X90LE:
- User manual (44 pages) ,
- Brochure & specs (24 pages) ,
- Quick start manual (4 pages)
Related Manuals for Wyse X90LE
Summary of Contents for Wyse X90LE
-
Page 1: Installation Guide
Installation Guide ® Wyse X90L and X90Le Mobile Thin Clients Flash and Memory Upgrade Kit Issue: 072310 PN: 883884-22L Rev. A... -
Page 2: Copyright Notice
End User License Agreement (“License”) A copy of the Wyse Technology End User License Agreement is included in the software and provided for your reference only. The License at http://www.wyse.com/license as of the purchase date is the controlling licensing agreement. - Page 3 Model Xn0L mobile thin clients contain a user-replaceable battery pack. The battery is designed to work with your Wyse mobile thin client. Do not use a battery from other mobile thin clients or laptop computers with your mobile thin client. Replace the battery only with a compatible battery purchased from a Wyse Authorized Service Center.
- Page 4 This page intentionally blank.
-
Page 5: Table Of Contents
About this Guide 1 Finding the Information You Need in this Guide 1 Wyse Technical Support 1 Wyse Online Community 1 Related Online Resources Available at Wyse 1 Getting Started 2 Kit Warranty 2 Kit Contents 2 Required Tools and Materials 3 Installing the Upgrade Kit 4 Verifying the Mobile Thin Client’s Operation 7... - Page 6 Contents This page intentionally blank.
-
Page 7: About This Guide
Wyse mobile thin client features can be found in the datasheet for your specific model. Datasheets are available on the Wyse Web site. Go to http://www.wyse.com/products, click the Wyse Mobile Thin Clients link, click the link for your mobile thin client, and then click the Download Datasheet link. -
Page 8: Getting Started
If you need to upgrade your operating system, contact Wyse Customer Support at: http://www.wyse.com/support. Wyse Thin Computing Software is available on the Wyse Web site at: http://www.wyse.com/products/software. Getting Started This section provides information about your flash and RAM kit warranty, kit contents, and required tools. -
Page 9: Required Tools And Materials
Required Tools and Materials You will need the following recommended tools to install the kit: • Small Phillips screwdriver • Plastic alignment tools or equivalent Figure 4 Recommended tools Warning Flash and RAM modules may be susceptible to damage by Electro-Static Discharge (ESD). -
Page 10: Installing The Upgrade Kit
Installing the Upgrade Kit To install the 1-GB, 2-GB, or 4-GB flash and one (1) 1-GB RAM Upgrade Kit in an X90L or X90Le mobile thin client: Caution Follow all precautions listed in the Quick-Start Guide that came with your mobile thin client for disconnecting and reconnecting the mobile thin client. -
Page 11: Lifting Up Keyboard
5. Using the plastic alignment tool carefully lift up the keyboard (start lifting at the arrow shown in Figure 7), and then lay keyboard facedown to expose the flash and memory modules. Caution The keyboard is very susceptible to bending so use caution when lifting. Figure 7 Lifting up keyboard 6. -
Page 12: Removing The Ram Module
7. Install the new flash module in the reverse order of removing the old module. 8. To remove the existing RAM module, use your fingers to unlock the two locking clamps at either side of the module by pushing the clamps in the direction of the arrows shown in Figure 9. -
Page 13: Verifying The Mobile Thin Client's Operation
Verifying the Mobile Thin Client’s Operation To verify that the mobile thin client works properly: 1. Reconnect the power cord and power adapter, and then press the power button on the mobile thin client to apply power. 2. After the mobile thin client restarts, close three windows that have opened on the screen by following these instructions: a. -
Page 14: Shutting Down From The Xpe Test Window
c. Click Shutdown in the XPE TEST window to shutdown the mobile thin client, see Figure 12. Figure 12 Shutting down from the XPE TEST window 3. Press the power button on the mobile thin client for it to restart. 4. -
Page 15: Client Information
Figure 13 Client Information 5. Verify that the MAC address and Serial Number matches the serial number and MAC address on the mobile thin client. 6. Verify that the RAM Configuration is approximately 1471 MB for early mobile thin clients and 1984 MB for current mobile thin clients. 7. -
Page 16: Attaching The Upgrade Serial Label
Attaching the Upgrade Serial Label The Wyse conversion kit is supplied with a serial label that must be attached to each mobile thin client. 1. Attach the label as shown in Figure 14. Sufficient labels must be purchased for mobile thin clients to be upgraded. -
Page 17: Figures
Figures Flash module types 2 RAM module types 2 Upgrade Serial Label 2 Recommended tools 3 Unsnapping the switch covers 4 Prying off the switch cover 4 Lifting up keyboard 5 Removing the flash module 5 Removing the RAM module 6 Closing the WinPing window 7 Closing the DOS window 7 Shutting down from the XPE TEST window 8... - Page 18 Installation Guide Wyse® X90L and X90Le Mobile Thin Clients Flash and Memory Upgrade Kit Issue: 072310 Written and published by: Wyse Technology Inc., July, 2010 ® ® Created using FrameMaker and Acrobat...