Neutron Time Synchronization Application - Wyse 9450XE Reference Manual

26

Neutron Time Synchronization Application

Clicking Start | Programs | Startup | Neutron opens the Neutron dialog box. The Neutron
dialog box contains the current System Time and Atomic Time. To Synchronize the
System Time with the Atomic Time, click Synchronize in the Neutron dialog box. To
retrieve the current Atomic time from a time server, click Get Atomic Time.
To configure the Time server IP address, click >> in the Neutron dialog box to open the
extended menu and select an IP address from the Time server drop-down menu. You can
also select (using the options and check boxes) whether to use TCP or UDP, whether or
not you want Auto synchronization to occur at system startup, and whether or not to exit
the Time server after the time has been synchronized. To close the extended menu, click
<<.
Figure 13 Neutron dialog box (extended menu)