Net And Tracert Utilities; User Log-On Accounts; Creating A New User Account; Winping Window - Wyse TM 9000 Series Reference Manual

52
Figure 30 WinPing window
WinPing is used to:
•
•
•
•

Net and Tracert Utilities

Net and Tracert utilities are available for administrative use. For more information on these
utilities, go to: http://www.microsoft.com.

User Log-on Accounts

Administrators can create new users and configure user profiles.
By default, a new user is only a member of the Users group and is not locked down. You,
as the administrator, must select the attributes and profile settings for a new user.

Creating a New User Account

New user accounts can be created by using the User Manager utility. You must be
logged-on as an administrator to create new user accounts. You can create user accounts
locally or remotely through VNC. However, due to local flash/disk space constraints, the
number of additional users should be kept to a minimum.
Determine the status of the network and various hosts.
Track and isolate hardware and software problems.
Test, measure, and manage networks.
Determine the IP address of a host if only the host name is known.
Caution
By default, all application settings are set to cache to C drive. It is highly
recommended that you cache to the Ramdisk Z drive (as is pre-set in the
User and Administrator accounts) to avoid overflowing the Write Filter cache.