Ramdisk Configuration Dialog Box - Wyse 9450XE Reference Manual

38
•
•
•
The RAMdisk can also be used for temporary storage of other data according to
administrator discretion (see "Local Drives" on page 51).
Double-clicking the RAMdisk icon in the Control Panel opens the Ramdisk Configuration
dialog box. Use this dialog box to configure the RAMdisk size. If you change the size of
the RAMdisk, you will be prompted to restart the system for the changes to take effect.
However, to permanently save the changes be sure that the Enhanced Write Filter cache
has been flushed during the current system session before restarting the system.
Figure 26 Ramdisk Configuration dialog box
Print spooling
User/system temporary files
ICA bitmap cache
Note
Depending on the thin client model and installed memory size, default
RAMdisk size may vary. The the minimum RAMdisk size that can be set is 2
MB; maximum RAMdisk size that can be set is approximately 25% of actual
RAM (for example, a system with 512 MB of RAM can have a maximum
RAMdisk of 125 MB).