Installer Setting-Setting Address Of Central Control - LG Single "A" Service Manual

Installer Setting - Setting Address of Central Control
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1 Press the button for 4
seconds to enter the installer
setting mode until timer segment
display "01:01".
2
Repeat pressing
Function code 02.
Function Code Group No
Ex) Setting Address as 'F5'
3 Set Group No. by pressing
button.
4
Move to Indoor No. setting option
by pressing
5 Set Indoor No. by pressing
button.
6 Press button to save or release.
7 Press button to exit or system will
automatically exit after 25 seconds
without any input.
- 35 -
Part 2 Functions & Controls
button to select
Indoor No.
button.
LGE Internal Use Only