Installer Setting-Zone State Setting - LG Single "A" Service Manual

Part 2 Functions & Controls

Installer Setting-Zone State Setting

This function is only available on some products.
It is possible to setup Variable or Fixed option for Zone State of indoor. The initial setting is 'Variable'
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1 Press button for 4 seconds
to enter the installer setting
mode until timer segment
display "01:01".
2
Repeat pressing
Function code 11.
Function Code
Ex) Setting Zone State as 'Fixed'.
3 Select Zone State rate fixing mode by
pressing
(01: Variable, 02: Fixed)
4 Press button to save or release.
5 Press button to exit or
system will automatically exit
after 25 seconds without any
input.
- 44 -
button to select
Zone State fixing mode
button.
LGE Internal Use Only