Installer Setting-Static Pressure Setting - LG Single "A" Service Manual

Part 2 Functions & Controls
Installer Setting -Static Pressure Setting
This function is applied to only duct type. Setting this in other cases will cause malfunction.
<Static Pressure Setting Table>
Pressure selection
01 F-L
02 F-H
03 V-L
04 V-H
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1 Press
to enter the installer setting
mode until timer segment
display "01:01".
2
Repeat pressing
Function code 06.
Function Code
3
Select static pressure by pressing
(01:V-H, 02:F-H, 03:V-L, 04:F-L)
4 Press
release.
5 Press
system will automatically exit
after 25 seconds without any
input.
Function
Zone state
Fixed
Fixed
Variable
Variable
- 40 -
button for 4 seconds
button to select
Pressure
button.
button to save or
button to exit or
ESP standard value
Low
High
Low
High
LGE Internal Use Only