Installer Setting-Dry Contact Mode Setting
This function allows the Dry contact-indoor unit operate under Auto Run mode or Manual mode with remote controller.
* Please refer to dry contact manual for more details.
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1
Press
button for 4 seconds
to enter the installer setting
mode until timer segment
display "01:01".
2
Repeat pressing button to select
Function code 09.
Function Code
Ex) Setting Dry Contact Mode 'ON'
3
Select Dry contact setting by
pressing button.
(00: OFF, 01: ON)
4
Press
button to save or release.
5
Press
button to exit or
system will automatically exit
after 25 seconds without any
input.
- 43 -
Part 2 Functions & Controls
Dry Contact setting value
LGE Internal Use Only