Installer Setting - Setting Address Of Central Control; Installer Setting - Checking Address Of Central Control - LG ATNQ36GNLE7 Installation Manual

Installer Setting - Setting Address of Central Control

Installer Setting - Checking Address of Central Control

1
With the FUNC. button pressed, press the RESET button.
2
Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display the
set address in the display window.
• The address display time and method can differ by the indoor unit type.
3
Reset the remote controller to use the general operation mode.
1
With the MODE button pressed, press the
RESET button.
2
By using the temperature setting button,
set the indoor unit address.
• Setting range : 00 ~ FF
3
After setting the address, press the
ON/OFF button toward the indoor unit 1
time.
4
The indoor unit will display the set address
to complete the address setting.
• The address display time and method
can differ by the indoor uint type.
5
Reset the remote controller to use the
general operation mode.
RESET button
INSTALLATION INSTRUCTIONS
17