Installer Setting-Ceiling Height Selection - LG Single "A" Service Manual

Installer Setting -Ceiling Height Selection
This function is to adjust FAN Airflow rate according to ceilingheight (only cassette model)
<Ceiling Height Selection Table>
Ceiling Height Level
01 Low
02 Standard
03 High
04 Super high
❈ Ceiling height setting is available only for some products.
❈ Ceiling height of 'Super high' function may not exist depending on the indoor unit.
❈ Refer to the product manual for more details.
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Decrease the indoor airflow rate 1 step from standard level
Set the indoor airflow rate as standard level
Increase indoor airflow rate 1 step from standard level
Increase indoor airflow rate 2 steps from standard level
- 39 -
1 Press button for 4 seconds
to enter the installer setting
mode until timer segment
display "01:01".
2 Repeat pressing
Function code 05.
Function Code
Ex) Setting Ceiling Height as 'Standard'.
3 Select ceiling height value by pressing
button.
(01:Low, 02:Standard, 03:High,
04:Super high)
4 Press button to save or release.
5
Press button to exit or
system will automatically exit
after 25 seconds without any
input.
Description
Part 2 Functions & Controls
button to select
Ceiling height
LGE Internal Use Only