Simrad AP25 Autopilot
5.4
Exchange of software programme
You will need a special kit for a PC to perform the programming
of the AC05 Autopilot Computer and the AP25 Control Unit.
Order the following from Simrad:
Programming kit P/N 22088595.
Instructions are included.
Autopilot Computer
Remove the bottom cover to get access to the software download
connector.
Software
download
connector
Autopilot Control Unit
Software
download
connector
Remove the cables and unscrew the six screws that secure the
back cover. Apply a firm pull with your fingers to pull the back
cover loose from the connector pins. Then you have access to the
software download connector.
90
Figure 5-1 Part of AC05 PCB
Figure 5-2 Part of AP25 PCB
20222139A