Exchange Of Software Programme; Autopilot Computer - Simrad AP25 Manual

Simrad AP25 Autopilot
5.6

Exchange of software programme

Autopilot Computer

Figure 5-1 AC10/AC20/AC40 Main PC-Board
• Remove the EPROM from the socket by means
• Insert the tool by pressing the two grip pins
• Squeeze the tool and pull out the EPROM.
• The identification tag indicates:
When inserting a new EPROM, make
Caution !
sure the cut-off corner matches with the
one in the socket. Press it gently into the
socket.
EPROM for AC10, AC20 and AC40
Autopilot Computers:
P/N 22088462
After change of EPROM, perform a master
reset as described on page 132.
136
of the special extraction tool (p/n 44139806).
down into the two slots in the corners of the
socket.
- Name of unit
- Part number
- Software version
Autopilot
Computer
EPROM
Identification
Cut-off
tag
corner
20221495F
Slots