Nmea Input Cable; Fish Finder Cable - Raymarine C-Series Installation Manual

Chapter 2: Installation

NMEA Input cable

The NMEA input cable is supplied with exposed wire connecting tails.These should
be connected to your existing NMEA instruments using suitable connector blocks
as follows:
Function
NMEA Input (+ve)
NMEA Input (-ve) common
Not connected
NMEA Output (+ve)
NMEA Output (-ve) common
Not connected

Fish finder cable

The fishfinder cable is supplied with your Digital Sounder Module (DSM). This cable
should be run and connected to the rear of the display. A terminator must be fitted
to the cable at the DSM.
offered by Busse-Yachtshop.com
Color
White
Green
Gray
Yellow
Brown
Screen
-29