Radar Cable - Raymarine C-Series Installation Manual

-30

Radar cable

Having ensured that the radar scanner you are using is compatible with the C-
Series Display, the cable should be connected as follows:
Radome
If you are using a radome this can be powered through the display. Just run your
cable and connect it to the radome and the display.
In this configuration significant current passes through the power cable. Any
Note:
extension should be as short as possible using a large wire gauge.
offered by Busse-Yachtshop.com
Radome
Radome
PAGE
ACTIVE
WPTS/
MOB
DATA
MENU
OUT
RANGE
IN
OK CANCEL
C-Series Displays Installation Manual
Boats DC
Power Supply
D6619-1