Seatalk Connection; Nmea 0183 Connection - Power/Nmea/Video Cable - Raymarine E SERIES Installation Instructions Manual

4.8 SeaTalk connection

You can connect SeaTalk devices to your MFD using
the optional SeaTalk to SeaTalk
1
SeaT alk
1. SeaTalk device
2. SeaTalk to SeaTalk
3. MFD
Cables and connections
ng® converter.
3
ng
2
ng® converter
4.9 NMEA 0183 connection —
Power/NMEA/Video cable
NMEA 0183 devices can be connected directly to
MFDs with a combined Power/NMEAVideo cable.
Refer to the Connection Overview section to
establish the NMEA 0183 connection method for
your MFD.
D12265-2
1 2
7 8
NMEA DEVICE
4800 / 38400 baud
2 NMEA 0183 ports are available:
• Port 1: Input and output, 4800 or 38400 baud rate.
• Port 2: Input only, 4800 or 38400 baud rate.
The baud rate for each input port must be specified in
the System Settings menu (Homescreen > Set-up
> System Settings > NMEA Set-up > NMEA Input
Port).
Note: For Port 1, both the input and output
communicate at the same baud rate. For example,
if you have one NMEA 0183 device connected to
Port 1 INPUT, and another NMEA 0183 device
connected to Port 1 OUTPUT, both NMEA devices
must use the same baud rate.
You can connect up to 4 devices to the display's
output port and 2 devices to the display's input ports.
Ite-
m Device
1 Multifunc-
tion dis-
2
play
3
4
3 4 5
9 10 11
NMEA DEVICE
4800 / 38400 baud
Cable Input /
color Port output
White 1 Input
Green 1 Input
Yellow 1 Output
Brown 1 Output
12
D13285-2
Posi-
tive (+)
/ nega-
tive (-)
Positive
Nega-
tive
Positive
Nega-
tive
43