Preparation; Installing/Replacing The Batteries - Omron MIT Elite Instruction Manual

2.Preparation

2. Preparation
2.1

Installing/Replacing the Batteries

1.
Turn the main unit upside down.
2.
Slide the battery cover in the
direction of the arrow while
pressing the ribbed part of the
cover.
3.
Install or replace four
batteries so that the + (positive)
and - (negative) polarities match
the polarities indicated on the
battery compartment.
4.
Put the battery cover back in
place.
Slide the battery cover as
indicated, until it clicks into
place.
Note: The measurement values continue to be stored in
10
memory even after the batteries are replaced.
" "
AAA size