Toshiba RAV-SM1603AT-E Service Manual page 134

2. How to replace the parts (Continued)
No. Work procedure
Remove the foaming part.
2
Note)
Remove the foaming part
carefully so that corners of the
foaming part of the inner plate
are not chipped off by being
caught.
Remove the right side plates
3
(2) and (3).
Note)
Remove the side plates so as
not to damage the pipe cover.
Take off the shield plate from
4
the heat exchanger.
Pull up the heat exchanger.
5
1) Take off the pipe fixing
bracket at liquid side.
Note)
Take off the bracket and heat
exchanger carefully so that
insulator materials of the
foaming part and side plates
are not chipped off.
Explanatory drawing
Foaming part
Right side plate (2)
Right side plate (3)
Pipe fixing bracket at liquid side 2 Pipe Pipe
– 134 –
Shield plate
Foaming part
Heat exchanger