Sherwood RD-7405HDR Operating Instructions Manual page 21

RD7405(A)100225_RD7405(A).qxp 2010-03-09 오전 9:47 페이지 21
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized
whenever you want.
1.
After performing the steps 1 ~ 4 in "Adjusting the
current channel level" procedure on page 20,
press the ENTER(/MEMORY) button.
• The "1" of "REF 1" indication flickers for several
seconds.
Recalling the memorized channel levels
1.
Press the CHANNEL LEVEL button.
• "CAL " (or "REF 1", etc.) is displayed for several
seconds.
• If the channel level mode display disappears, press
this button again.
2.
Select the desired one of REF 1 and REF 2.
• If the preset memory disappears, perform the
above step 1 again.
3.
Confirm your selection.
• The adjusted channel levels have now been
memorized into the selected memory.
2.
Select the desired one of REF 1 and REF 2.
• Then the channel levels memorized into the
selected preset memory are recalled.
21