Konica Minolta bizhub 350 Operations page 346

parameters.
Item
Program Name
Mode
Destination
Original Type
Original Type
Density
Reduction
Scan Area
Menu 1
TSI
Dest. Insert
TX Report
2in1
2-Sided TX
Rotation TX
Priority TX
Description
Type in the name of the program that will appear as the name of
the one-touch dial destination. Up to 12 characters can be en-
tered.
Select "TX".
Specify the program destination. Click [Select Destination], selec
the check box of a registered one-touch dial destination, and the
click [Apply].
Select the scan resolution.
Select the scan density.
This is a fax setting. For details, refer to the User's Guide [Facsimil
Operations].
Specify the document size for scanning.
Select transmission source information to print the registered tex
such as the name, fax number, or address, at the edge of pages
sent with the Internet fax operation.
For details on registering transmission source information, refer t
"TSI Registration" on page 9-48.
Select whether to print the destination name at the top of the pag
when sending Internet faxes.
Select the conditions for outputting the transmission results repor
Default: Select this setting to output the report according to the
setting specified from the Administrator Management screen.
Output On: Select this setting to output the report, regardless of
the transmission result.
If TX Fail: Select this setting to output the report only if the trans
mission failed.
Output Off: Select this setting to not output the report, regardles
of the transmission result.
Select whether to send an Internet fax using the 2in1 function
(printing two pages on one page).
Select whether or not a double-sided transmission is performed
with the Internet fax operation.
On: Select this setting to perform a double-sided transmission.
When set to "On", specify the binding margin and page orientatio
Off: Select this setting to not perform a double-sided transmissio
Select whether or not to rotate the scan image according to the pa
per orientation of the receiving machine when sending an Interne
fax.
The resolution can be set to 200 dpi or less when sending an A4
size document.
Select whether or not the data is sent with priority over other job