The settings used by the LDAP (Lightweight Directory Access Protocol
er in a network can be specified.
Settings can be specified for the following.
Item
LDAP
Search Default
Setting
Specifying the LDAP settings
1
In the Administrator mode, click the Network tab.
–
For the procedure to log on to Administrator mode, refer to "
ging on to Administrator mode" on page 9-12.
2
Click [Common Setting], then [LDAP].
3
Select whether to enable or disable LDAP searches, and then clic
ply].
Description
Select whether to enable or disable address searches where the LDAP
is used. If "Enable" is selected, the LDAP server can be specified.
Select which of the registered LDAP servers is to be accessed. This p
ter appears if an LDAP server has been registered.