Konica Minolta bizhub 350 Operations page 141

Programming a one-touch dial button
By registering a destination with a one-touch dial button, transmission
be performed easily and accurately.
You can register two types of destinations with a one-touch dial butto
main destination and a secondary destination, where the data is sent if
mission to the main destination fails.
Note
A secondary recipient can be specified if the optional scanner unit
kit is installed.
If the "Restrict One-Touch Editing" parameter on the Administrato
screen (displayed from the Administrator Management screen) is s
"ON", [E-Mail Input] is added to the Administrator Management 1 s
and can be used to register, change and delete one-touch dial but
For details on the Administrator Set screen, refer to the User's Gui
[Copy Operations].
!
Detail
The following communication modes can be specified for the seco
destination.
- PC (E-Mail)
- PC (Scanner)*
- InternetFAX (Internet FAX)
- InternetFAX (IP-TX)*
- InternetFAX (IP Relay)*
- FAX (G3)**
*The communication mode can be specified if the optional scanne
or fax kit is installed.
**The communication mode can be specified if the optional fax kit
stalled.