HYOSUNG ST7 Owner's Manual page 75

TIRE REPLACEMENT
FRONT TIRE REPLACEMENT
1. Place the motorcycle on the jack or
block vertically.
CAUTION
Improper jacking may cause damage to
the frame or engine.
2. Remove the front axle pinch bolt cap
and loosen the front axle pinch bolt
(the right side of the motorcycle).
3. Loosen the front axle
4. Carefully position a jack or block under
engine and raise until the front wheel is
slightly off the ground.
5. Draw out the front axle
6. Slide the front wheel forward.
7. To reinstall the front wheel assembly,
reverse the sequence as described.
.
.
74
REAR TIRE REPLACEMENT
1. Place the motorcycle on the jack or block
vertically.
CAUTION
Improper jacking may cause damage to
the frame or engine.
2. Remove the mounting bolts, engine
pulley cover and drive belt case.
WARNING
A hot muffler can burn you.
The muffler will be hot enough to burn
you for some time after stopping the
engine.
Wait until the muffler cools to avoid
burns.