HYOSUNG ST7 Owner's Manual page 27

SELECT SWITCH
Use this switch to adjust the following :
In the normal mode
Push it for
Normal mode
2 ~ 4
seconds
Request to check the mal-
function item's code
5 seconds
(Malfunction code mode)
In the clock reset mode
Push it for
0.6 ~ 1
Increase the minutes of clock
seconds
Clock reset mode
2 seconds
In the malfunction code mode
Push it for
0.6 ~ 1 End of the malfunction
seconds code mode
RESET SWITCH
Use this switch to adjust the following :
In the normal mode
Push it for
0.6 ~ 1 Odometer Trip meter
Trip meter
seconds
Reset the trip meter to zero,
2 seconds while the display indicates
trip meter
In the clock reset mode
Push it for
0.6 ~ 1
Increase the hour of clock
seconds
Adjustment
Clock reset mode
Adjustment
Normal mode
Adjustment
Adjustment
A
Odometer
B
or
A B
Adjustment
SPEEDOMETER
The speedometer indicates the road
speed in kilometers or miles per hour.
WARNING
Obey the speed limit and traffic regula-
tion at all times.
"FI" (Fuel Injection) CHECK LAMP
It comes on when the ignition switch is set
to "ON" position with the engine stopped as
a test of injection system operation.
As soon as the engine starts, this lamp
should go out.
If the fuel injection system fails, the red
"FI" check lamp
If the "FI" check lamp does not come on
when the ignition switch is set to "ON"
position with the engine stopped or fail
to go out after the engine start, contact
an authorized Hyosung dealer.
Riding the motorcycle with the "FI"
check lamp lit can damage the engine
and transmission.
Whenever the "FI" check lamp is lit,
have your authorized Hyosung dealer or
a qualified mechanic inspect the electric
fuel injection system as soon as possi-
ble.
26
comes on.
CAUTION
CAUTION