HYOSUNG ST7 Owner's Manual page 74

CRACKS AND CUTS
Check if
1) there are visible cracks and cuts.
2) there are abnormal wears.
SCREW,
FOREIGN
MATERIAL
WORN,
CRACK
ABNORMAL
WEARS
TIRE TREAD CONDITION
Tire wear
indicator
Operating the motorcycle with excessively
worn tire will decrease riding stability and
can lead to loss of control.
Inspect storage of tire thread's depth by
the tire wear indicator .
Replace the front and rear tires at once
when appear the tire wear indicator .
The standard tire on
120/80 - 16 60H for front, and
170/80 - 15 77H for rear.
The use of a tire other than standard
may cause trouble.
It is highly recommended to use the
standard tire supplied by Hyosung.
REAR AXLE NUT
Inspect the rear axle shaft and jointing nut
for loosening.
73
Tire wear indica-
tor mark
CAUTION
is