HYOSUNG ST7 Owner's Manual page 68

CAUTION
The drive belt for this motorcycle is
made of the special material.
The belt should be replaced with a "poly
chain belt" for
Use of another belt may lead to prema-
ture belt failure.
CAUTION
The drive belt should be inspected every
time before riding.
Excessive belt slack could cause the
belt to come off the pulleys and result in
accident or serious engine damage.
WARNING
Be careful not to touch the muffler when
it is hot : a hot muffler can burn you.
.
67
CAUTION OF DRIVE BELT
When the drive belt was bent excessively,
the belt inner cord is broken.
Never bend the drive belt under the speci-
fication of inner or back bend capacity.
Back bend
BEND CAPACITY OF DRIVE BELT
Back least 204 mm (8.04 in)
least 102 mm (4.02 in)
Inner
CAUTION
Never bend or twist when the drive
belt is kept or installed.
If the drive belt was installed with dri-
ver forcedly, damage the drive belt.
Never clamp
or bend
Inner bend