Related Manuals for Jensen JiSS-585
Summary of Contents for Jensen JiSS-585
- Page 1 Universal Docking Station with RF Wireless Speakers for iPod USER MANUAL JiSS-585 ® (iPod Not Included) PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
-
Page 2: Dear Jensen ® Customer
The serial number of this product is found on the unit. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JiSS-585 l a i Number:... -
Page 3: Important Safety Instructions
WARNING Do not throw the product into fire to avoid danger of explosion. Do not immerse into water or get soaked since the battery charging function will be lost. Place the product far away from heat sources, and protect the product from direct sunlight. -
Page 4: Compliance With Fcc Regulations
Cleaning The unit should be cleaned properly with care. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any opening or vents located on the product. Attachments Do not use attachment not recommended by the product manufacturer. Lightning and Power Surge Protection Unplug the unit from the wall outlet and disconnect the periods of time. -
Page 5: Power Sources
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. -
Page 6: Location Of Control
ACCESSORIES Please see below items are included in the package: 1. AC Adaptor 2. AUX in Cord (3.5mm) 3. Remote Control (include button cell CR2025) 4. User Manuals (English and Spanish) 5. Warranty Card LOCATION OF CONTROL 1. Base (Top View) 2. -
Page 7: General Operation
3. Speaker Unit 4. Remote Control GENERAL OPERATION 1. Select a proper docking adaptor (enclosed when purchase an iPod) and place it into the base, then dock your iPod gently. -
Page 8: Troubleshooting Guide
2. Plug the AC adaptor plug into DC power Jack at the rear side of base. 3. Press the power button on the base or remote control to turn the unit on. Switch on the speakers to play your iPod. Choose the best channel through the “Channel” button at the rear of the base until the speakers receive the right signal. - Page 9 Speakers do not play Speakers receive signal from the sound from other devices, or the other set of docked device JiSS-585 Sound is cut off or The unit experiences noisy interference Sound is distorted Sound source is distorted.
-
Page 10: Specifications
SPECIFICATIONS Power Supply Power adaptor (included): Input Output DC 9V Power of remote control: 1 x DC 3V CR2025 button cell (included) Frequency RF Channel Transmission: 915.0MHz (Channel 1) 914.5MHz (Channel 2) 914.0MHz (Channel 3) SERVICE Please refer to the instructions on the enclosed warranty card for returning your unit for service. When returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible battery leakage.