Jensen JiSS-600i User Manual

Jensen JiSS-600i User Manual

Docking digital music system with wireless speakers for ipod and iphone

Advertisement

DOCKING DIGITAL MUSIC SYSTEM WITH
WIRELESS SPEAKERS FOR iPod AND iPhone
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
®
USER'S MANUAL
JiSS-600i
(iPod/iPhone Not Included)

Advertisement

Table of Contents
loading

Summary of Contents for Jensen JiSS-600i

  • Page 1 ® DOCKING DIGITAL MUSIC SYSTEM WITH WIRELESS SPEAKERS FOR iPod AND iPhone USER’S MANUAL JiSS-600i (iPod/iPhone Not Included) PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
  • Page 2: Dear JensenĀ® Customer

    DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
  • Page 4: Compliance With Fcc Regulations

    life span. 19. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek advice from your local qualified service technician or contact the distributor via the telephone number at the back of this instruction manual. 20.
  • Page 5: Protect Your Furniture

    'feet' before you place the product on fine wooden furniture. PRODUCT FEATURES The JiSS-600i is an iPod/iPhone Docking Music System with incorporates the following features:  Play and Charge your iPod nano, iPod touch, iPod classic, iPod video and iPhone.
  • Page 6: Location Of Controls

    LOCATION OF CONTROLS DOCKING BASE & SPEAKERS 1. Left Satellite Speaker 2. Right Satellite Speaker 3. Speaker Status Indicator 4. Docking Base 5. Remote Infrared Sensor 6. Volume Down (-) Button 7. iPod/iPhone Docking Connector 8. Volume Up (+) Button 9.
  • Page 7 14. Docking Base Power On/Standby Button 15. Speaker Power Switch 16. Speaker Link Button 17. Speaker Channel Selector 18. USB Transmitter Port 19. AUX IN Jack 20. DC IN Jack REMOTE CONTROL Infrared Transmitter Power ON/Standby Button; iPod/iPhone Menu Enter Button iPod/iPhone Menu Scroll Up ...
  • Page 8: Led Indications

    USB TRANSMITTER 1. USB connector 2. Indicator of transmitter 3. Transmitter Link button LED INDICATIONS LED Position Discription LED Status No Power LED Off Power Indicator Power on Solid Green (Docking Base) Standby Solid Red Speaker Battery No charging LED Off Charging Indicator Charging Flashing Green...
  • Page 9: Installation

    INSTALLATION CONNECTING THE AC POWER An AC-DC Adaptor with 7.5V DC 2400mA output (included) is required for operating the main unit. Plug the AC-DC Adaptor into the unit and into an AC outlet: 1.) Firmly and securely insert the DC plug of the adaptor into the DC Jack on the back of the unit 2.) Plug the Adaptor plug into an outlet rated at 120V ~ 60Hz.
  • Page 10: Getting Start

    remote will not work if the battery is installed with the wrong polarity. CAUTION: Danger of explosion if the battery is replaced incorrectly. Replace only with the same type battery. 3.) Insert the battery holder back into the battery slot. NOTE: Only use a well-known brand of cell battery to ensure the longest life and best performance.
  • Page 11: Listening To Ipod/Iphone

    LISTENING TO iPod/iPhone CONNECTING 1.) Use the adapter included with your iPod and insert it into the docking area. No adaptor is required if you use an iPhone. Your iPod / iPhone can now be inserted into the docking port by placing the connector on the bottom of the iPod onto the connector in the docking bay.
  • Page 12 iPod/iPhone playback;  Press the SKIP buttons to skip to the next or previous song;  Press and hold the SKIP buttons for fast-forwarding or fast-rewinding during playback.  Press and hold the PLAY/PAUSE / M button for 3 seconds to control iPod / iPhone screen menu.
  • Page 13 and listen to it through your wireless speaker system. 5.) Open the music player program on your computer, and adjust the volume of the player program to a low level. 6). Click the play button, and slowly increase the volume level of your player program to adjust the sound level.
  • Page 14: Auxiliary Input

    Note: 1. To allow the speakers to charge to maximum capacity, the sound level will be reduced to about 80% automatically if you use the speakers with the docking base while charging them. Press the volume control of docking base to increase the sound level if necessary after charging.
  • Page 15: Care And Maintenance

    (3) Press the POWER button to turning off the system when you finish listening. Don't forget to switch off the power of your external device as well. RESETTING If the system does not respond or has intermittent operation, you may have experienced an electrostatic discharge (ESD) or a power surge that triggered the internal computer to shut down automatically.
  • Page 16: Troubleshooting Guide

    TROUBLESHOOTING GUIDE Symptom Possible Problem Solution AC Adaptor is not plugged into a wall outlet or the Plug the AC adaptor into a wall outlet and plug The unit does connector is not plugged the connector into the supply jack on the unit. not respond into the power supply jack (no power).
  • Page 17: Specifications

    SPECIFICATIONS Power Requirement Main unit AC-DC adaptor Input: AC 120V, 60Hz Output: DC7.5V / 2400mA Wireless Speaker Built-in DC 3.7V, 1000mA rechargeable lithium Battery Remote Control 1 x 3V CR2025 Lithium Battery Working Frequency Band: 2.406-2.472GHz “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod and iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
  • Page 18 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.

Table of Contents