HYOSUNG Karion Owner's Manual page 50

Motorcycle
Table of Contents

Advertisement

● ● BRAKE PADS
Inspect the front brake pads by nothing
whether or not the friction pads are worn
down to the grooved limit line. If a pad is
worn to the grooved limit line it must be
replaced with a new one by your authorized
Hyosung dealer or qualified service
mechanic.
Inspect every day in the following point at
the brake system.
Brake fluid leak of the front brake
system.
Leak or damage of the brake hose.
Operating of the brake lever.
Wear of the front brake pads.
Limit line
The front brake system be replaced the
brake hose or the brake fluid according
to periodic inspection chart by your
authorized Hyosung dealer for safety as
in times of operating at high pressure.
Riding with worn brake pads will reduce
braking performance and will increase
your chance of having accident. Inspect
brake pad wear before each use. Ask
your Hyosung dealer or qualified
mechanic to replace brake pads if any
pad is worn to the limit.
After replaced the front brake pads, the
brake lever pull and release several
times so that it is setting at the original
place.
Then, do not ride the motorcycle untill
operating the brake fluid and becoming
the brake distance.
◉ ◉ BRAKE DISK INSPECTION.
Check the brake disk for damage or cracks.
◉ ◉ FRONT BRAKE FLUID SUPPLY
1. Place the motorcycle on a level surface
and keep the handlebars straight.
2. Clean the brake fluid reservior around not
to allow dust to get inside of it.
3. Loosen the screw and open the cap.
4. Replenish with brake fluid to the upper
line.
탐태
CAUTION
WARNING
CAUTION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents