HYOSUNG Karion Owner's Manual page 42

◉ ◉ CLEAN OF BATTERY TERMINAL
Clean the battery terminal when it is dusty
or rusted.
1. Set the ignition switch OFF position.
2. Disassemble the battery cover,
disassemble the (
wire after the (
Remove the battery.
3. Clean the terminal.
If there is white dust, clean it with warm
water.
4. Assemble the battery wires and grease
the terminal lightly.
CAUTION
● ● Keep the battery away from fires.
● ● When disassemble the battery wire,
take off � � terminal first with the
ignition switch OFF position. When
assemble, � � terminal first.
● ● Fasten certainly the battery wires.
● ● Incorrect installation of the battery
will reverse the terminal position
resulting in possible electrical
system damage due to incorrect
battery lead connection.
● ● Never charge a battery while still in
the machine as danage may result to
the battery or regulator/rectifier.
)positive battery
)negative battery wire.
탐폽