Fortinet FortiCarrier-5001A-DW Manual page 13

Table of Contents

Advertisement

Hardware installation
1
2
3
FortiCarrier-5001A Security System Guide
01-400-91945 -20090223
Table 3: FortiCarrier-5001A SW11 settings for different chassis
Chassis
FortiGate
-5140 or 5050 or
any ACTA chassis with an
operating shelf manager
(factory default shelf manager
mode).
FortiGate
-5020 or any ACTA
chassis without an operating
shelf manager (standalone
mode).
Note: If the shelf manager in a FortiGate-5140 or FortiGate-5050 chassis is missing or not
functioning, FortiCarrier-5001A boards with factory default SW11 settings will not start up.
To change or verify the SW11 switch setting
To complete this procedure, you need:
A FortiCarrier-5001A board
A tool for changing the SW11 switch setting (optional)
An electrostatic discharge (ESD) preventive wrist strap with connection cord
Caution: FortiCarrier-5001A boards must be protected from static discharge and physical
shock. Only handle or work with FortiCarrier-5001A boards at a static-free workstation.
Always wear a grounded electrostatic discharge (ESD) preventive wrist strap when
handling FortiCarrier-5001A boards.
Attach the ESD wrist strap to your wrist and to an available ESD socket or wrist
strap terminal.
If you have installed the FortiCarrier-5001A board in a chassis, remove it.
For removal instructions, see
Use
Figure 6
to locate SW11 on the FortiCarrier-5001A board.
The top of the FortiCarrier-5001A board is covered with a copper heat sink. The
printed circuit board is under the copper heat sink. SW11 is located on the printed
circuit board and is accessible from the left side of the FortiCarrier-5001A board
under the copper heat sink (see
Changing FortiCarrier-5001A SW11 switch settings
Correct SW11
Result of wrong jumper setting
Setting
1
Off
Shelf manager cannot find
FortiCarrier-5001A board. No shelf
2
On
manager information about the
FortiCarrier-5001A board available.
3
Off
4
Off
1
Off
FortiCarrier-5001A board will not start
up.
2
On
3
On
4
Off
"Removing a FortiCarrier-5001A board" on page
Figure
6).
18.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forticarrier-5001a

Table of Contents