Registering Ip Telephones - Panasonic KX-NCP500 Manual

4.5 Registering IP Telephones

4.5.1 Registering IP Telephones
After the programming of the PBX and IP telephone is finished, the IP telephone must be registered to the
PBX. This is done using the Maintenance Console.
Registration of IP-PTs
a.
1.
Under Configuration, click Slot.
b.
Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot at the top of the screen, and
click Select Shelf. Move the mouse pointer over
the V-IPEXT32 card. A menu will be shown under
the mouse pointer.
c.
Click Port Property.
To register the IP-PT by entering the MAC address
directly:
2. If the Connection column for the port is INS, click
INS, and then click OUS on the dialog box to change
the port's status.
3. Enter the MAC address of the IP-PT in the IP Phone
Registration ID (MAC Address) box.
4. Click Apply.
Once the IP-PT is successfully registered, the status
of the IP-PT will update to show "Registered".
5. In the Connection column for the port, click OUS, and
then click INS on the dialog box to change the port's
status.
To register the IP-PT using the wizard:
2. Click Registration.
A dialog box will appear. Non-registered (available)
extension numbers and names are displayed on the
left.
Document Version 2009-12
4.5.1 Registering IP Telephones
IP Networking Guide 77