Panasonic KX-NCP500 Manual page 55

KX-NT265 (software version 2.00 or later only)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Press VOLUME to
select "Network".
IP Address*
To set the subnet mask address
Press VOLUME to
select "Subnet Mask".
To set the default gateway address (if required)
Press VOLUME to
select "Default GW".
To set VLAN parameters
HOLD
Press HOLD to return
to the Menu screen.
OR
To end programming
HOLD
Press HOLD to return
to the Menu screen.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
Document Version 2009-12
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE. Press VOLUME to
select "DHCP (Disable)".
1
Press SP-PHONE.
Subnet Mask Address*
Press SP-PHONE.
Default Gateway Address*
Press SP-PHONE.
To the VLAN settings
The IP-PT will reboot
registered to the PBX.
Press STORE.
4.4.1 Assigning the IP Addressing Information
Press SP-PHONE
twice.
2
3
and can then be
Press SP-PHONE.
Press SP-PHONE.
IP Networking Guide 55