Panasonic KX-NCP500 Manual page 83

8. a.
Under Do not use proxy server for addresses
beginning with:, type the IP address of the LAN
port of the card.
b.
Click OK.
Your PC is now ready for programming the
KX-HGT100 through an IP network.
Programming the KX-HGT100
1. Start Internet Explorer from the Start menu.
2. a.
Enter the IP address of the KX-HGT100 in the address box.
b.
Press the Enter key.
3. The log-in screen will appear.
a.
In the User name box, type the user name (default: KX-HGT100).
b.
In the Password box, type the password (default: kx-hgt100).
c.
Click OK.
4. The top page will appear.
a.
Click Basic Setting.
b.
In the Telephone Number and SIP ID boxes, type
the extension number.
c.
In the SIP Password box, type the password.
d.
In the Proxy Address, Registrar Address, and
SIP Domain boxes, type the IP address of the
IPCMPR card.
e.
Click Save.
f.
Click Return to top page.
Note
For information on other parameters, refer to
Parameter Descriptions.
5. a.
Click Restart.
b.
Click Restart now for changes to take effect. The
KX-HGT100 will be restarted.
If the authentication information of the
KX-HGT100 and the PBX match, the registration
is successful.
Note
To access Web Programming after restarting the KX-HGT100, it is necessary to (1) turn the KX-HGT100
power off, and (2) hold the OK and MUTE buttons while turning the power on.
Document Version 2009-12
4.5.1 Registering IP Telephones
IP Networking Guide 83