Panasonic KX-NCP500 Manual page 68

4.4.3 Setting the Diffserv Parameters
KX-NT321
To start programming
Press PROGRAM while
"Searching" is displayed.
To set the DS field value for the primary port
Select "Primary Port".
Diffserv
0.0–7.7
To set the DS field value for the secondary port
Press HOLD to return to
the Diffserv setting screen.
Press SP-PHONE.
To end programming
Press HOLD to return
to the Menu screen.
68 IP Networking Guide
Select "QoS".
Press SP-PHONE.
Press SP-PHONE. Select "DS (Enable)".
Press SP-PHONE.
Select "Secondary Port". Press SP-PHONE.
Diffserv
0.0–7.7 Press SP-PHONE.
The IP-PT will reboot
registered to the PBX.
Press STORE.
Select "Diffserv".
Press SP-PHONE.
Select "DS (Enable)".
and can then be
Press SP-PHONE.
Document Version 2009-12