Panasonic KX-NCP500 Manual page 75

KX-NT265 (software version 2.00 or later only)
To start programming
Press PROGRAM while
"Searching" is displayed.
To configure the port number of PTAP Ports
Press VOLUME to
select "PTAP Server".
Press VOLUME to
select "PTAP Client".
To configure the port number of DHCP Ports
Press VOLUME to
select "DHCP Server".
Press VOLUME to
select "DHCP Client".
To configure the port number of FTP Ports
Press VOLUME to
select "FTP Server Ctrl".
Press VOLUME to
select "FTP Client Ctrl".
Press VOLUME to
select "FTP Client Data".
To end programming
HOLD
Press HOLD to return
to the Menu screen.
Document Version 2009-12
Press VOLUME to Press SP-PHONE.
select "IP Port".
Port No.
1024 – 65535
Press SP-PHONE.
Port No.
1024 – 65535
Press SP-PHONE.
Port No.
67, 1024 – 65535
Press SP-PHONE.
Port No.
68, 1024 – 65535
Press SP-PHONE.
Port No.
21, 1024 – 65535
Press SP-PHONE.
Port No.
1024 – 65535
Press SP-PHONE.
Port No.
1024 – 65535
Press SP-PHONE.
registered to the PBX.
Press STORE.
Password
7678
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
The IP-PT will reboot
and can then be
4.4.4 Configuration of IP Ports
Press SP-PHONE.
IP Networking Guide 75